Caliburn Metric Hardware Upgrade Kit Remix -TDM Update

thingiverse

Update - 29th November Now includes regular Takedown Magwell components, and a hardware list text file. Metric Upper, Metric Lower, Metric Milan Coupler included in Zip file. These are remixed parts for the caliburn specifically sized to fit a 15.88mm OD*1.42mm Wall barrel, a 6mm standoff in the sear, M3 screws instead of 4-40 in the grip and muzzle, and M5 nut sized sockets in the TrenchP and Backbutt. You don't need to print the Dartjam or Monolitic Magwell if you're going to print the Takedown magwell; I just kept them in case someone wanted to print them for whatever reason. These will be of limited use to people who don't have a metric hardware kit, but I listed what you'd need anyway, or at least a rough guide to put you on the right track. **PLEASE NOTE** You **will** need the rest of Captain Slug's caliburn hardware kit printed, minus the files contained in this listing. These parts are meant to substitute the parts in Slug's kit. ALSO, the magwell is not strictly necessary since the tight fit shroud holds it in place nicely; but if you haven't printed one yet, it's recommended you print one. To make your own hardware kit, replace anything that says 4-40 in the specs with M3x8mm or M3x10mm for muzzle screws holding in the barrel. Replace anything that says 10-32 or fits onto a 10-32 thread with M5, or refer to the text file provided for a comprehensive list. Instructions: Choose whether you wish to print the Monolithic Magwell or the Takedown Magwell. If your printer is very well set up or you want tight-fitting parts, print them from the "tight fit" Zip file. You may need to work the barrel in or ream it out slightly; but it will go in tight. If your printer isn't very well set up or you're not confident in how it's set up, or you want a looser fit with parts on the barrel like the barrel shroud, print them from the "Looser Fit" Zip file. Print everything else provided.