Caliburn_Convertible_Talon_Katana_and_Elite

thingiverse

The "Taliburn" is a modified Caliburn Lower that accepts either Talon or Katana magazines with ease. When combined with the Universal upper, you can seamlessly switch between Elite full-length darts and magazines, as well as Talon/Katana mags for half-length darts. You can build one upper and easily replace the lower between the standard Caliburn Lower and the Taliburn Half-Length Lower by simply pulling out the takedown pins and swapping in the new lower without needing any magazine adapters. The upper has been modified to allow Katana mags to seat deeply enough, and the Katana/Talon Mag releases can now reach the magazine with no issues. The Lower has been modified to fit the standard Elite Upper and utilize the dual-spring Mag release system just like on the Talon Claw. Elite, Talon, and Katana mags all have different depths that require precise seating so that the darts align with the ram. After seating a magazine, you may need to pull it down slightly so that the magazine release catches the mag at the correct height and the darts are aligned perfectly. The Caliburn Standard Lower magwell is left unmodified and included here, as well as the Talon Claw V3c Mag releases, which remain unchanged. To print this design, use the same settings you would for any other Caliburn print - I personally use 0.28 Layer Height and 25% Infill with great results.