
Calibration test .5 to 10.0 in .5 steps.
thingiverse
Customized test piece for specific application requirements. I recently repaired a damaged DaVinci AiO, needing a simple test pattern to avoid consuming excessive time or resin. Between this and the available test-nickel fixtures on the site, I quickly recommissioned the machine after repair. A modified version of http://www.thingiverse.com/thing:42800 Created using Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=42800 Print Settings: * No rafts are used. * Supports are not required. * I applied all the default settings from the XYZ software for resolution. * I ran separate infill tests with 100% hollow, medium at 30%, and full at 90%. Notes: * Before printing, ensure your bed is perfectly level. Instructions: To produce the test pattern using the provided options: - Use a _5_gap setting of 3 units. - Apply a height of 4 to _6_height. - Choose a _1_style option set to 1. - Set _4_increment to 0.5 increments. - End the sequence after reaching _3_end at 10 steps. - Designate _8_numColumns for a total of 10 columns. - Set the base height to _7_baseHeight at 1 unit. - Initiate the start from _2_start, positioned at 0.5 units.
With this file you will be able to print Calibration test .5 to 10.0 in .5 steps. with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Calibration test .5 to 10.0 in .5 steps..