Calibration Set (With Emboss)

grabcad

The calibration and testing set includes varying elements such as inclination angles from the y-axis (40-90 degrees, 5-degree increments), 15, 17, and 20mm diameter curved domes, and solid cylindrical pieces with dimensions ranging from D=1mm, H=27mm to D=17mm, H=13mm. Through-all holes are available in sizes of 1-20mm, while pocket slots measure 4-6mm. A 90-degree wall rib is positioned at a 70-degree angle from the x-axis. Bolt fixtures include M6 hex x 15mm and M8 hex x 20mm hex bolts, as well as M6 x 15mm and M4 x 15mm round bolts. A ladder element with a total height of 33mm (each step at 6mm) is also provided. An optional square pocket for bolts and nuts is available, and if needed, you can 3D print suitable components from the provided design on this link: https://gallery.autodesk.com/projects/nuts-and-bolts. For best results, use high tensile strength and ductility filament, and have fun!