Calibration for resin printers, 5mm tall for quick test HD High Def

thingiverse

This swift, uncomplicated test/calibration model is printed using the "Hello World" STL with high-definition detail, limited only by printer precision. On a B9Creator, it takes approximately 10 minutes at 50 micron z (100 layers) or 15 minutes at 75 micron z. Key objects include a 10-diameter cylinder with 1 radius, two 2-thick arches, a 10-diameter hemisphere, and a half cube with 10 sides and rounded corners. Additionally, there are six cylinders ranging in diameter from 1 to 3.5. For printing, use B9C version 1.1 and Spot-A-HT version 7 settings: 50 microns x, y, z, and 4 base layers with the first two cured at 10 seconds each, followed by three + two seconds. Post-printing, take a photo immediately after printing and another following cleaning from uncured resin and a 2-minute UV light cure. To prevent warping during curing, rotate the object.