caddx vista runcam link case with cooling fan

thingiverse

This a modded version of my Caddx Vista cooling fan air unit mount. https://www.thingiverse.com/thing:5432529 It retains the same mounting method for the air unit and adds a camera housing. This allows the entire unit to be mounted with Velcro and easily moved to a different RC vehicle. I have three versions of the case included. The Complete Case Vertical can be printed vertically in one piece with no support needed. The Case Vertical No Guide allows you to add the Antenna guide separately. The remaining 3 files allow the Antenna Guide, Base, and Top to be printed separately and the top and base glued together once all of the electronics are in. The electronics can also be added to all three cases by sliding the camera through the rear of the case first and screwing it down, then slide the air unit without the antenna in, but don't lock it in yet with the four 2mm bottom screws. Position the air unit in the case so that you can mount the antenna to the air unit through the cooling fan hole, then lock the air unit in with the four 2mm bottom screws that line up with the holes in the air unit. Finally, install the cooling fan with the four 3mm screws