Caddx Vista Nebula Pro Canopy for Babytooth and other frames

thingiverse

4/25/2021 - Uploaded battery holders here in case you have trouble accessing the link. (2s 450mah holder. Note: I haven't tested the 3S version.) 3/21/2021 - FYI if you are using the babytooth frame, use the 3mm frame instead of 2mm. I started with 2mm frame but was getting some minor vibrations. I was able to tune out some of the vibrations after doing a lot of blackbox tuning with lot of filtering. Switched to the stiffer 3mm frame, no more vibrations and it flies much better. Also, 3-blade props (Gemfan 3016-3) seem to have better grip and better control than 2-blade props. 3/15/2021 - added a version with fin. This is a remix of https://www.thingiverse.com/thing:4724162 Remixed to fit a naked/de-cased Caddx Vista Nebula Pro on a Babytooth frame. I also wanted to use long M2 screws to secure the entire stack from frame to canopy. - Added M2 through holes and standoffs - Added VTX antenna mount to fit TrueRC Singularity micro ufl antenna - Added mount to mount a minimortal T antenna inside the canopy. (I ended up mounting minimortal T on the frame instead but I have included the version that has the mini mortal T mount.) - Moved the right camera hole slightly forward. For some reason, I was seeing the right edge of the canopy. Could be just my camera. - USB cutout for Vista - I'm using a JHEMCU GHF411AIO PRO 25A F4 and orient the Vista's USB port facing motor 3. I'm using M2 x 30mm screws. https://www.amazon.com/gp/product/B0756VTP54 Use M2 metal locknuts between the screws and frame for stability and rigidity. https://www.amazon.com/uxcell-0-45mm-Insert-Carbon-Plated/dp/B07MKFVPJS/ref=sr_1_37 or https://www.amazon.com/gp/product/B08VF3BSDB/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 For spacers, you can nylon m2 nuts https://www.amazon.com/Litorange-Standoff-Threaded-Motherboard-Assortment/dp/B07D78PFQL/ref=pd_bxgy_img_2/130-2141466-7340866 or https://www.amazon.com/AUXcell-Metric-Thread-Insert-Fastener/dp/B07JNL4VNN See picture how I mount the FC / Vista Nebula Pro / Canopy. For VTX antenna, I use TrueRC Singularity short ufl LHCP antenna https://www.racedayquads.com/products/truerc-singularity-5-8ghz-short-u-fl-antenna-rhcp-or-lhcp?variant=31387077476465 Print using 0.2mm layer height. 100% infill with support. For FC, I use JHE which has a 9V out to power the Nebula Pro. https://www.racedayquads.com/products/jhemcu-ghf411-pro-2-6s-f4-aio-toothpick-whoop-flight-controller-w-25a-4in1-esc?_pos=647&_sid=f3ecb5e89&_ss=r PS. I drilled out M1.6 holes on the Vista into M2 2mm holes using this 5/64" (= 2mm) drill bit from Home Depot https://www.homedepot.com/p/Milwaukee-SHOCKWAVE-5-64-in-Titanium-Drill-Bit-48-89-4602/205878987 Don't forget to remove conductive mesh and add kapton tape to the vista modules. Or cover the mesh with some sort of tape. (The mesh is conductive and almost shorted the LED) The mesh does help keep the video plug from coming off during a hard crash. See picture. If you need a battery holder mount for Babytooth frame, see here https://www.thingiverse.com/thing:4795822 I have good luck using R-Line batteries. (Low internal resistance, minimal voltage sag) https://www.racedayquads.com/products/tattu-r-line-7-4v-2s-550mah-95c-lipo-micro-battery-xt30?_pos=5&_sid=1eac9001e&_ss=r