Cactuar (Cactilio)

thingiverse

Cactuar’s silhouette can be easily transformed into a fridge magnet or decorative plate.\nIf you enjoyed this idea, consider showing your appreciation by giving us a small tip to continue sharing new concepts.\n—————\nThe outline of cactus-like creature is versatile and can be turned into an effective refrigerator magnet or decorative dish.\nIf you liked this concept, a small donation will help us keep coming up with fresh ideas. Thank you!\nPrint Settings\nPrinter Brand: \n RepRap\n \n Printer: \n Prusa i3 Hephestos\n \n Rafts: \n No\n \n Supports: \n No\n \n Resolution: \n 0.3\n \n Infill: \n 0%\n \n Notes: \n This design requires only one print file. You can use green filament or paint it afterwards. Keep in mind that excessive shell layers may result in gaps between details. At the default size, a single shell layer of 0.4mm is sufficient for a good quality piece. For larger prints, you might want to use two shell layers.\nMy Cura settings:\nLayer height: 0.3mm\nShell thickness: 0.8mm\nBottom/top thickness: 0.6mm\nFill density: 0%\nIf you print this design at a larger size, consider adding some infill to prevent surface defects.\nThis design is easy to print and requires only one file. Use green filament or paint it later. Be aware that too many shell layers can cause gaps in details. At the default size, one shell layer of 0.4mm is enough for a good piece. If you make a large Cactuar, you may want to use two shells.\nMy Cura settings:\nLayer height: 0.3mm\nShell thickness: 0.8mm\nBottom/top thickness: 0.6mm\nFill density: 0%\nIf your print is larger, you might want to add some infill to prevent surface defects.