Cable Reel

prusaprinters

<p>Wanted to make a print in place large cable reel. Middle spinner is print in place.&nbsp;</p><p>To eliminate all supports I made body in two pieces plus a crank handle.&nbsp;</p><p>I was able to fit a 10m (30ft) #14 insulated extension cord. It was a tight fit so Id say 25ft max or longer with a smaller wire size.&nbsp;</p><p>Could be used for any cable/cord/string that fits. I have not tried but small Christmas lights should be able to fit as well.&nbsp;</p><p>I printed in white PLA (don't recommend white as it gets dirty fast), but should be fine to print in any any material you want.&nbsp;</p><p>0.6 nozzle.&nbsp;</p><p>3 perimeters (5 on crank posts)&nbsp;</p><p>Total print time: 16.5 h - about 450g of filament.&nbsp;</p><p>9h - Left body&nbsp;</p><p>6h - Right body&nbsp;</p><p>1.5h - Crank&nbsp;</p><p>Body and crank fit together quite nicely with no glue. Adding a bit of super glue on the post-slots would crate a solid single body.&nbsp;</p><p>0.2mm clearance on body connection and 0.4mm on crank.&nbsp;</p><p>&nbsp;</p><p>&nbsp;</p>