Cable Drag Chain for MakerFront i3PRO

thingiverse

This is a humble cable drag chain that I crafted to fit my needs perfectly. The project required more rotation in a small radius, so I took the initiative to design it from scratch. UPDATE I have uploaded the mount ends for the drag chain, featuring a 100% infill rate. However, be aware that you'll need to drill and refine the holes yourself for optimal installation. High-quality photos are provided as well. You're free to modify the original files if you wish to personalize this design further. If you have any questions or concerns, please don't hesitate to ask them now. Print Settings Printer Brand: Printer: MakerFront i3Pro Rafts: Any preference is okay Supports: Yes Infill: 25%, 100% Notes: An infill of 25% works great for the Link sections, Ends, and Mounts. However, due to its size, an infill rate of 100% produces superior results for the Link Pin. The default scale is set at 1:1, but it can be scaled up as needed. Settings for Link, End, and Mount Layer Height: 0.1mm Shell Thickness: 0.8mm Top/Bottom Thickness: 0.6mm Fill Density: 25% Print Speed: 80mm/s Printing Temp: 240C Bed Temp: 100C Filament: 1.75mm Flow Rate: 100% Nozzle Size: 0.4mm Settings for Link Pin Layer Height: 0.1mm Shell Thickness: 0.8mm Top/Bottom Thickness: 0.6mm Fill Density: 50% Print Speed: 40mm/s Printing Temp: 240C Bed Temp: 100C Filament: 1.75mm Flow Rate: 100% Nozzle Size: 0.4mm