Cable Clip for Modular Mounting System - Customizable

prusaprinters

<p>This is a cable clip that is compatible with the <a href="https://www.printables.com/model/185322-modular-mounting-system-arms-customizable">Modular Mounting System Arms</a> and <a href="https://www.thingiverse.com/thing:3689842">thing:3689842</a> by jtronics.</p><p>There are STL and STEP files available for cable sizes ranging between 2mm and 9mm in 0.5mm increments.</p><p>You can also <a href="https://cad.onshape.com/documents/b951b444bc0cfb8ab4119a8d/w/60f8227d88c6f2763bf98359/e/944dfa554eadb2529af6b276">customize this part in Onshape</a>. Edit the configuration parameters in the upper left to your specific requirements. Then right-click on the part in the lower left and select "export".</p><h3>Installation</h3><p>Insert the hook between the 2 beams of the arm and rotate it 90 degrees. It's intentionally a very tight fit so that it stays in place. Use a pair of needle nose pliers if you have them available.</p><p>Clip the cable into the hook. The opening measures 80% of the cable diameter which is small enough so that the cable doesn't come loose and large enough so that it's easy to insert the cable.</p><h3>Printing</h3><p>Use 2 or 3 perimeters and about 20% infill. No supports required.</p><p>Category: Camera</p>