Cable Chain and Mounts for K40 Laser

thingiverse

Here is a detailed list of all parts needed to create a cable change for the K40 Laser, along with print settings and notes on how this design was created. **All Parts Needed:** To make this cable change, you will need to print one copy of each item listed below, plus as many chain links as required to complete your assembly. This remix improves the strength of the Y carriage end mount and includes all parts as individual files for easier use. **Photos Included:** To help with assembly, I've included photos that show exactly how to put everything together. **Print Settings Used:** * Printer Brand: RepRap * Printer Model: Fisher XT * Rafts: No raft was used in the printing process. * Supports: There were no supports printed for this design. * Resolution: The printer resolution used was 0.2mm. * Infill Percentage: I printed with a fill percentage of 30% to 50%, depending on the component. **Design Notes and Printing Details:** I designed this cable change using Tinkercad, adding extra wall supports as needed. To split the files, I used Simplify 3d. The components were printed in PLA, with three shells and an infill percentage of 30% for the chain links and 50% for the mounts.