Cabinet Hardware Jig

prusaprinters

<p>This jig is strongly inspired by the jig of the well known blue colored jig brand. Although they have the same properties, they are not compatible.</p><p>This jig has built-in measuring scales and a adjustable edge guide for easy positioning.</p><ul><li>19 mm - 111 mm edge guide to hole center spacing</li><li>center, 64 mm, 96 mm and 128 mm drill spacing guide</li><li>2 Drill guides for use with a 4.5 mm drill bit</li></ul><h4>&nbsp;</h4><h4>Parts</h4><p>For building this jig you need:</p><ul><li>1 x Jig base</li><li>1 x Edge guide</li><li>2 x Drill guides with knurled nuts</li><li>2 x T-knobs</li><li>2 x Hexagon bolts M6x20mm</li><li>2 x<a href="https://www.amazon.de/gp/product/B08RDSHCQZ/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&amp;psc=1"> Inserts M6x10mm, brass</a></li><li>2 x <a href="https://www.amazon.nl/gp/product/B077J2NZNL/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&amp;th=1">Hardened drill bush 4.5mmx8, DIN179A</a></li></ul><h4>&nbsp;</h4><h4>Print instructions</h4><p>This is a multi color print. Change the filament when printing the measuring scale on the back of the tool or use the print file enclosed.</p><p>I printed the jig with and without support and the results are nearly the same with a slightly better result on the angled front face when printed with support.</p><p>Print the jig upside down on the bed on a textured steel sheet for best results.</p><p>&nbsp;</p><h4>Print settings</h4><p><strong>Layer height: </strong>Jig 0.15 mm and other parts 0.2 mm</p><p><strong>Infill:</strong> Jig 50% and other parts 30%</p><p>Select ‘Detect thin walls’ in the print settings of your slicer.</p><p>&nbsp;</p><h4>Filament</h4><ul><li>Prusament PETG Prusa Orange</li><li>Prusament PETG Jet Black</li></ul><p>&nbsp;</p><p>&nbsp;</p><p>&nbsp;</p>