CA-87 (ANH: Jawa's Ion Blaster) Grenade launcher only Remixed Parts

thingiverse

I printed the fantastic Grenade Launcher by Straeker and encountered a few issues I had to resolve, so here are the changes I made. Hopefully, this will be helpful for you. My project utilized a toy musket (instead of the printed version) which required modifications to work with this launcher, and the resulting parts I printed for this were modified to make it suitable for that project. I've included all the parts and a description below of how they differ from the originals. **CA-87_Grenade_launcher_connector_and_base.stl** This is the two original connector and base parts joined together for printing as one piece, with no additional mods made. **CA-87_Grenade_launcher_connector_and_base_shell.stl** This was created to allow printing of the connector and base in 'spiral vase' mode to facilitate test fitting against the blaster, with a minimum of printing required. **CA-87_Grenade_launcher_greeblies_fixed.stl** These are the same as the originals; however, I discovered some mesh issues that caused them to have holes, which were fixed using the netfabb STL repair service. **CA-87_Grenade_launcher_muzzle_with_alignment.stl** **CA-87_Grenade_launcher_Gas_chamber_with_alignment.stl** When assembling these two parts originally, there was no decent gluing surface between the parts. I've added a slight lip to the 'gas chamber' and a slight bevel to the muzzle. When printed, the parts now have something to help them line up for gluing. **CA-87_Grenade_launcher_connector_and_base_v2.stl** This is a highly modified version of the original connector and base. Firstly, the two parts were joined, then remodeled to eliminate small imperfections, then the muzzle of the connector piece was shortened by 50% and widened internally to 22mm diameter; to make it work for my particular project.