C64C pi 4b+ Retropie replacement plates

thingiverse

This project is for a Raspberry Pi 4b+ housed within a C64C case, inspired by https://www.thingiverse.com/thing:4413053. I'd like to extend my gratitude to PitMan from Berlin for providing the case. Here's an overview of the parts used in this project: To Part 1: The first part was printed with a 50% infill and required support structures. To Part 2: The second part was printed with a 25% infill and did not require any support. To Part 3: The third part was also printed with a 50% infill, necessitating the use of support structures. ## The Parts We Used 1x USB-C Mount Cable: https://www.amazon.com/dp/B075P2S4Z5 1x HDMI Coupling: https://www.amazon.com/dp/B00B7AGIQ2/ 2x USB-A Mount Cables: https://www.amazon.com/dp/B00S6HGY72 1x Micro HDMI to HDMI Cable (Short): https://www.amazon.com/Duttek-schlank-flexibel-Ethernet-12inches-30cm/dp/B07VCC1F4L/ 1x PowerBlock by Petrockblock with USB-C Connector: https://www.amazon.com/gp/product/B0867FJN2J Script for Power On/Off via Switch with the PowerBlock: "wget -O - https://raw.githubusercontent.com/petrockblog/PowerBlock/master/install.sh | sudo bash" 1x Red Cap SPST The Current Mini Momentary Push Button Switch: https://www.amazon.com/dp/B01FDJLRRW 1x Keyrah V2b Board to Plug the C64 Keyboard onto the Pi4 via USB: https://www.amiga-shop.net/Amiga-Hardware/Amiga-classic-hardware/Keyrah-v2::606.html (Optional) 3mm x 8mm Tip Flat Head Self-Tapping Screws: https://www.amazon.com/dp/B01FXMJ5KA (Optional) INCREWAY 1050 Metric Screws (M1.4 M1.6 M2 M2.5 Screw): https://www.amazon.com/gp/product/B07KN4C9XV You also have access to FCStd-Files, allowing you to modify everything in FreeCAD.