C5/C6/C7 Corvette shifter alignment tool V2 (MGW)

thingiverse

This is my V2 of an alignment tool for C5 / C6 / C7 Corvette manual shifters. This is intended to work with MGW shifters but will likely work with any shifter for these cars.Compared to my prior version, this is now 2 pieces and MUCH stiffer. I printed PETG which in general isn't very stiff, but the tool is plenty stiff being printed in PETG.The 2 pieces are intended to be fastened together with a screw and 2 dowel pins:-flat-head screw, 1/2"-13, 1-1/4" long. I used McMaster # 91263A603-2x dowel pins, 3/32" x 0.50"For this you'll need to drill out the hole in part B to 27/64", and tap with 1/2"-13 tap. It's a bit challenging to hold the part and tap it... but you can probably put the dowel pins between the 2 parts and hold with part A to complete the tapping operation.Note that the cylindrical fit on part B may need to be tuned... I tuned the diameter according to my printer. I attached the STEP files if you need to tune the size.