BUTTERFLY NIGHT LIGHT

cults3d

NOTE: COPYRIGHT PA1© - SUBSCRIBE TO MY PATREON TO GET ALL MY FILES FOR FREE, EXCLUSIVE MODELS AND A COMMERCIAL LICENSE TO SELL YOUR PRINTS: https://www.patreon.com/PA1_MAKER Super cute and calming night lamp in the shape of a butterfly. -Fits Prusa Mini -No need for transparent/clear filament -100% support free -Easy to print/assemble -Full access door at the back -Can be scale by 133% to have a bigger lamp (see note below) -Two backplates included: One blank and one with a slot. INSTRUCTIONS: You will need (5x) M3X6mm screws (imperial 6-32 equivalent will work too) Print one of each part following those recommendations: For the light box and the backplate: Use a 0.3mm layer height. Fast print, can be done under 4 hours with the right settings for the light box and under an hour for the backplate. FOR THE BUTTERFLY SILHOUETTE: Use a normal filament, the color of your choice, for the base layer. You don't need to use a tranparent or clear filament, the face is thin and let the light easily shine through. Use a 0.2mm layer height. You will have to change filament color with a pause at height (Or color change, the one you prefer) at the corresponding layer. Once everything is printed, glue the face to the light box and install your led strip inside from the back. When finished, simply close the backplate and the assembly is done! IF YOU CHOOSE TO SCALE IT UP: Use a scale factor of 133%. You will have to replace the M3 screws with M4 screws instead. If you have any questions, just ask! I will try to help as much as i can!!! Have fun!!!!