Business card holder

prusaprinters

<p><strong>Business card holder</strong> is a modification of my original Desktop Nameplate<br/> <a href="https://www.thingiverse.com/thing:162367">https://www.thingiverse.com/thing:162367</a><br/> and Desktop Nameplate for single or dual extrusion<br/> <a href="https://www.thingiverse.com/thing:256837">https://www.thingiverse.com/thing:256837</a></p> <p><strong>Features</strong><br/> 1) The business card holder is an optional addition to the desktop namplate.</p> <p>2) Choice of Google fonts: Anton, Archivo Black, Baloo, BreeSerif-Regular, Courgette, FrancoisOne-Regular, Montserrat, and Roboto-Black</p> <p>3) The nameplate volume is slightly increased (affecting printed height).</p> <p>4) The nameplate volume is designed to act as a weighted base. I have been successful using aquarium gravel. It is clean and can be easily handled using a paper tube cut on an angle (see photo).</p> <p>5) Can print as a single unit or multiple pieces for dual extrusion.</p> <h3>Print instructions</h3><p>No rafts / No supports<br/> <strong>Resolution:</strong> 0.3 mm<br/> <strong>Infill:</strong> 5%</p> <p><strong>Notes:</strong></p> <p>There is a need to weigh down the base to balance the weight of the business cards due to the geometry.</p> <p>Set your slicer to 0.3 mm per layer, 4 bottom layers / 4 top layers and 5% infill in a grid pattern. Pause the print at 16.4 mm. Fill it with the aquarium gravel.</p> <p>I have been successful using aquarium gravel. It is clean and can be easily handled using a paper tube cut on an angle (see photo).</p> <p>Change the filament at 18.2 mm for the lettering.</p>