Burial Blade

thingiverse

Burial Blade from Bloodborne Fun drawing lots of small components mixed together with huge ones... I included individual print files for the whole part locked in scythe position or just for the blade without a pin slot if you do not want to try to print the moving assembly. Individual Print Files BB-Full_Locked BB_Blade_No_Slot Assy Print Files (one of each) BB_Blade BB_BladePinFront BB_BladePinRear BB_LowerGripGlued BB_LowerGripPin BB_LowerGrip BB_UpperGrip 15% Assy Print Files (one of each) 15_Blade 15_PinHiltFront 15_PinHiltRear 15_LowerGripGlued 15_PinGripFold 15_LowerGrip 15_UpperGrip Second January 2018 update Breakaway do not seem to work so made a new versions. Pins and locking features are simplified and are now just straight pins no longer built into the assembly. Additionally I made a mistake in the grip connection and made it impossible to connect the two pieces together. This should be resolved, now you need to place upper grip in the slot in the lower grip and then glue the two parts of the lower grip together. Additionally I uploaded an additional set of files scaled down to 15% and I modified the tolerances accordingly. Special Thanks to WhiteFang97 for the feedback. January 2018 update Modified the Pins and some connection areas. Changed the build now there are 3 parts in the assembly with pins built in. The pins will very easily break away from the main body and will be left loose but enclosed in their housing (you want this). There is one pin for each joint. Once each pin is free, you can pull them all out to assemble the blade. Then push each of the pins back into place and twist them to lock them in place. This will require a good printer and it will not work if the assembly is scaled down too much as the tolerances will get too small. I have not printed it yet, so I can not guarantee it will function properly. -Headless Moose