Bullseye LED Light Bar - 24V Stripe v1.2

thingiverse

#BULLSEYE LED LIGHT BAR - 24V STRIPE This little light bar is designed for the original "Bullseye Hotend Cooler". It's a simple yet effective solution to illuminate your printer. - Version one is a thin, illuminated lightbar that can be printed in PLA, but it's recommended to print it in PETG or ABS. - Version two is a stronger version of the light bar, printable in PLA and designed for use inside an enclosure. It's perfect for those who want a more robust solution. The light bar is specifically made for a 24V LED stripe (L-50mm x W-20mm x T-8mm), so you can plug it directly into your printer's 24V PSU, such as the Ender 3. However, you can use any LED strip you prefer. This particular LED strip should fit: https://www.aliexpress.com/item/Double-row-SMD-5050-10-meters-120led-m-IP67-120-LED-strip-24V-10m-waterproof-Led/32702401771.html To secure the light bar in place, you can use cable ties or double-sided duct tape. However, the best solution is to drill two small holes into the bullseye and use small wood screws. =============================== Update v1.1 =============================== A web has been added to the LED profile for increased stability, especially when printing with PLA, which tends to deform slightly when it warms up. If your printer is well-calibrated, bridging should work fine; if not, please use a support. The end-cap dimensions have also been adjusted to fit better. =============================== Update v1.2 =============================== A stronger version of the LED profile has been added, designed for use inside a printer enclosure and printable in PLA, but recommended for PETG or ABS. Have fun printing!