Bullet Mixer Adapter Ring

thingiverse

Many times a Bullet style mixer becomes unusable because the tabs that hold the cup to the mixer base break off the cups. This print provides a simple adapter that can replace the tabs. To use it, you need to remove the existing tabs from a cup which has damaged tabs. This ring can then be glued under the existing ring (I used E-6000, which weathered the dishwasher just fine.) The base of the mixer cup can then be screwed on to the cup. I would not recommend adapting this to other mixer cups that do not have a screw on base. That is part of what keeps this secure.The model files here are designed for the Bella Rocket Blender model: XJ-11401B1. The SCAD files is parameterized so you can adjust this for your own Bullet style mixer.WarningMake sure the ring is firmly attached to the cup and his held in place by the screw on base. Make sure enough of the screw on base is attached to be secure. IF THE CUP COMES LOOSE FROM THE BASE WHILE THE MACHINE IS RUNNING, UNPLUG THE MACHINE. DO NOT MESS WITH THE SPINNING BLADES! (I did not have this issue, but be safe.)The adapter lifts the cup off the base somewhat. The seal at the bottom may not engage fully. As a result, you may get some seepage along the threads. You may want to print a new seal in TPU, adding to the thickness by the height of the ring.