Bull-Pup 10/22 Drop in Stock

cults3d

save by buying direct from me https://forg3d-by.myshopify.com/ This is not to produce a working firearm. This is a file to create a chassis for a Ruger 10/22 that should be procured through all proper legal channels. None of the parts designed here can be altered to be designated as a firearm under the NFA. This is a super clean 10/22 stock that just requires a couple nuts and bolts and just one spring to assemble. Overall length with any 10/22 variant will meet the NFA required 26" OAL minimum to avoid needing SBR registration. Broken out into pieces to print on a 220x220x220x build space The purchase is for the electronic files only. Exploded assembly model as well as individual parts are provided on checkout. UPDATED PARTS Receiver 2.0 will serve much better than the receiver in the full set. Trigger 2.0 NEEDS to be used in place of the first trigger for it to fit into the slot space for the trigger housing. Trigger Housing 1.1 is required if you wish to use the larger trigger supplied in the first release. SUGGEST ORIENTATIONS All parts that have a flat edge (along the top of the stock) should be oriented upside down and printed flat on the surface, using tree supports The receiver should be printed at a 30 degree angle with the bottom facing the build plate, also using tree supports The other parts all have flat edges and can be printed without supports if your machine is well tuned, but i still run tree supports. PARTS LIST (5) M3X16 bolts (2) M3X20 bolts (7) M3 hex-nuts (4) M5X30 bolts (2) M5X40 bolts (6) M5 hex-nuts (1) spring with 5mm-7mm diameter between 15mm and 25mm long (depends on your preference) Epoxy for permanent connections Do not sell, post, or share the file or any of the individual parts or any derivatives of this product. All rights to do so are being retained by me, the creator of this model.