Bull Head

pinshape

Bull head with ABS filament, but you can also use PLA or other materials. Nozzle temperature is set at 245 degrees. Heat bed temperature is maintained at a consistent 105 degrees. The layer height of this print is precisely 0.15 millimeters. Infill density is optimized to 15% for added strength and durability. This model features four distinct shells, providing enhanced structural integrity. Support material will be generated during the printing process, ensuring stability and preventing warping. Raft and brim settings are enabled to provide a secure base for the print. The estimated print time for this project is approximately eleven hours. The final weight of the printed part will be 115 grams. Dimensions: The bull head model measures 160 millimeters in length, 102 millimeters in width, and 87 millimeters in height. Post-processing for ABS prints involves a series of steps: 1. Use sandpaper with grit ranging from number 120 to 600, immersed in a bucket of water. 2. Gently polish the print with a soft cloth. 3. To achieve a high-gloss finish, apply a small amount of vegetable oil and buff the surface with a clean rag.