Build toys for fun

prusaprinters

Build something or anything with bolts and nuts and wheels and pins and cubes. Build a christmas-present :-) Print instructions HurKulSomHelst File Comment Cube.stl A cube without any link Cube Link.stl A cube with 4-corner pins Cube Link B.stl A cube with 4-middle pins Cube Link C.stl A cube with one center pin Cube Triangle.stl A cube, cut diagonal Link.stl Short link Link Medium.stl Medium sized link Link Medium B.stl Medium sized link, both ends Link Lid Medium B.stl A "lid" for Link Medium B Link Long.stl Long link Link Long B.stl Long link, both ends Link Lid Long B.stl A "lid" for Link Long B M4_5 Bolt 14mm.stl Bolt 4.5mm, in sizes 14,24,34,44,54,64,74,84 mm M4_5 Nut Scale to 107.8.stl Nut to 4.5mm bolt, scale to 107.8% in slicer M8 Bolt 15mm.stl Bolt 8mm, in sizes 15,25,35,45,55,65,75,85 mm M8 Nut Scale to 106.stl Nut to 8mm bolt, scale to 106% in slicer Stick 2.stl Stick, comes in 2,3,4,5,6,7,8 sections Wheel 50mm.stl Wheel for 8mm bolt or pin, suggested use with 30mm wheel Wheel 40mm.stl Wheel for 8mm bolt or pin, suggested use with 22mm wheel Wheel Pin Big.stl Pin to big wheels *2) Wheel Pin Small.stl Pin to small wheels *2) Fast nyckel 13mm v1.stl A tool for the bolts and nuts of course :-) *1) Notes *1) For 7.5mm key (the M4.5), scale it to 57.7% in the slicer, that is for X, Y and Z *2) Can be very tight, but when on the wheel the wheel should spin free Compatible with https://www.prusaprinters.org/prints/40925-raspberry-pi-case-for-camera-with-flexible-stand More Notes I have experienced that different filaments have different properties. Sometimes the pins fits the holes, sometimes to tight and sometimes to loose. You have to try yourself. if it wont fit in one way it may fit in another. You may have to "exercise" the parts. Anyway, Have fun!