Build Plate Holder for SparkMaker FHD

thingiverse

Human: Build Plate Holder for SparkMaker FHD===================================== This utility is designed to hold your build plate securely while dripping resin or cleaning, eliminating the need to place it on a table. A spring-loaded head allows for effortless adjustment of the build plate. Required Parts -------------- * 1x M5x25 hex screw * 1x M5 nut * 1x M4x35 hex screw * 1x M4 washer * 1x M4x30 countersunk screw * 2x M4 nut * 1x approx. D6x20 spring * 1x base plate (about 160x160mm) * 4x M4 screws and nuts, or self-tapping countersunk screws * 1x D15x160 pipe Printing -------- All parts are designed to print without support. Installation ------------ 1. Insert the hex screws into the Screw Head parts. 2. Place both M4 nuts in the Pipe Adapter (the nut for the spring screw must be inserted through the pipe hole). 3. Put the M4 countersunk screw through the spring, securing the Build Plate Adapter and Pipe Adapter together. Tighten the screw so that the spring locks the two parts together, but allows for easy rotation. 4. Insert the M5 nut into the Build Plate Adapter along with the M5 hand screw. 5. Fasten the Pipe Base to the base plate using 4 countersunk screws. 6. Secure the pipe in the Pipe Base. 7. Mount the Pipe Adapter on the pipe and secure it in position with the M4 hand screw (add a washer between the screw and the printed part).