Build Plate Holder for SparkMaker FHD

myminifactory

Build Plate Holder for SparkMaker FHD===================================== This utility is designed to hold your build plate securely while dripping resin or cleaning, eliminating the need to place it on a table. A spring-loaded head allows for easy adjustment of the build plate's angle. Required Parts--------------- * 1x M5x25 hex screw * 1x M5 nut * 1x M4x35 hex screw * 1x M4 washer * 1x M4x30 countersunk screw * 2x M4 nuts * 1x approx. D6x20 spring * 1x base plate (about 160x160mm) * 4x M4 screws and nuts, or self-tapping countersunk screws * 1x D15x160 pipe Printing-------- All parts are designed to be printed without support. Installation-------------- 1. Insert the hex screws into the Screw Head parts. 2. Insert both M4 nuts into the Pipe Adapter; note that the nut for the spring screw must pass through the pipe hole. 3. Attach the M4 countersunk screw to the spring and fasten the Build Plate Adapter and Pipe Adapter together, securing them with a loose fit so they can rotate easily. 4. Insert the M5 nut into the Build Plate Adapter along with the M5 hand screw. 5. Use 4 countersunk screws to secure the Pipe Base to the base plate. 6. Fix the pipe in the Pipe Base. 7. Mount the Pipe Adapter on the pipe and secure it in position using the M4 hand screw, placing a washer between the screw and the printed part.