Build Plate Adaptor (-4mm) for Magnetic Plate for ANYCUBIC Photon Mono M5s

thingiverse

Build Plate Adaptor for Magnetic Plate for ANYCUBIC Photon Mono M5s This shorter adaptor, 4 mm shorter, replaces the connector so that it compensates for the thickness of the magnetic plate, which will stay at the same height as the factory build plate. Attention, the 2 screws need to be reduced accordingly or shorter screws are needed so that this will work. I used Screws 4x35 DIN 912 ISO 4762 Uni 5931. But I imagine you could just reduce the original screws around 4mm with a carborundum or diamond cutting disc and sand paper. You can print it sideways you with the flat smaller side on the build plate, some deburring and sanding would be needed afterwards. I used Anycubic Tough Resin Grey for this... it worked perfectly well. you can also try a Flexible Build Plate like this: Saturn 2. “Flexible Spring Steel Resin Build Plate 224x129mm” Amazon link: https://www.amazon.com/dp/B0C2C3DJRB This magnetic build plate is slightly larger, or 1mm larger in width and depth, I think the original build plate is at this dimension: 218 x 123 x 200 mm The Anycubic Photon Mono M5s is the first levelling-free resin printer for the home! With 12K resolution and a build volume of 218 x 123 x 200 mm, it allows you to turn the most creative ideas into reality. https://www.3djake.com/anycubic-3d-printer-and-accessories/photon-mono-m5s#:~:text=The%20Anycubic%20Photon%20Mono%20M5s,most%20creative%20ideas%20into%20reality.