BTT TFT35 E3 LCD display mount for SUNLU S8
thingiverse
The title says it all. This mount enables you to attach a BigTreeTech TFT35 E3 screen directly to a SUNLU S8 3D printer. Be aware that this is designed specifically for the E3 (Ender 3-compatible) version of the display, not the original one. Note that the stock board in the SUNLU S8 is incompatible with the TFT35. You will need to upgrade the board to one that is compatible. My BTT SKR V1.4 Turbo upgrade for the SUNLU S8 can be found here: https://www.thingiverse.com/thing:4335720. Additional hardware required: * 8 - M3x8mm screws * 4 - M3x16mm (or 15mm) screws Installation: 1. Label both ends of the gray 10-conductor ribbon cables as 1 and 2. 2. Verify the correct orientation of the 4+1 pin cable with Dupont connectors. 3. Part 1 screws into the SUNLU cover plate from the back using four M3x8mm screws. 4. Plug the three cables into the board and route them out the opening in the cover plate. 5. Route the cables through the opening in Part 2 into the case. 6. Make sure the cables are lying flat, then screw Part 2 to Part 1 using four M3x8mm screws. 7. Attach the cables to the TFT35 display, EXP1->EXP1, EXP2->EXP2, and TFT->RS-232. 8. Screw Part 3 to Part 2 using four M3x16mm screws. 9. Press the knob onto the shaft. 10. Secure the cover plate to the printer case
With this file you will be able to print BTT TFT35 E3 LCD display mount for SUNLU S8 with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on BTT TFT35 E3 LCD display mount for SUNLU S8.