[BTT] Smart Filament Sensor mount and pass thru IKEA LACK table

thingiverse

I've created a mount for the smart filament sensor from BigTreeTech (BTT), so I can put a dry box on the IKEA enclosure and feed the filament directly into my hotend. What you need: * Smart Filament Sensor from BigTreeTech (longer screws are included in the box from BTT) * 25mm hole/drill in the IKEA Lack table I've designed it so that you screw the mount with the filament sensor on the pass-through. Both have a thread, so nothing else is needed. It holds securely for me. Please make sure to print the thread at a small layer height (recommended: adaptive layer height, which will give you a lower LH at the thread and then a bigger one to save a lot of print time). ### Installation 1. Print both parts 2. Remove 2 screws from the filament sensor (both middle ones) 3. Use the longer provided screws from BTT to mount it on the plate 4. Drill a 25mm hole in the IKEA table 5. Insert pass-through 6. Cut PTFE tube to needed length 7. Align the mount on the pass-through, making sure the PTFE tube comes out 8. Screw the mount carefully onto the pass-through, do not overtighten or you'll break the thread