BTT SKR Mini E3 V1.2 Adapter Plate for XVico X3
thingiverse
Adapts a BigTreeTech (BTT) SKR Mini E3 V1.2 to the XVico X3/Pioneer chassis. Fusion 360 link: https://a360.co/2SAxV4u . You will need: * 4 to 6 M3x6mm flat-head screws * 3 M3 "fender" washers (OD should be larger than 6mm) Installation: * Secure adapter plate to X3 chassis with three flat-head M3 screws and fender washers. Avoid the frontmost hole near the center of the printer, as leads from connectors on Mini E3 board may short to this screw. * The fender washers must be thin and deform slightly when tightened * Test fit Mini E3 board in place, connecting hotend heater wires beforehand if necessary, due to connector proximity to printer front * Place Mini E3 board in position and secure with at least 3 M3 flathead screws. Mounting holes are close to components on the board, so no washers should be used.
With this file you will be able to print BTT SKR Mini E3 V1.2 Adapter Plate for XVico X3 with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on BTT SKR Mini E3 V1.2 Adapter Plate for XVico X3.