BTT HDMI7 Screen Mount

prusaprinters

<p>This is a mount for the BTT HDMI7 display. &nbsp;Was designed for a vcore-3 but should work on any 3030 or 2020 extrusions.</p><p>It includes 2 different mounting pieces for 3 different mounting options. Use 2x mounting feet facing up or down to place on top, or sling underneath. Use 2x mounting back to have the extrusion running centrally down the back.</p><p>Print 1x screenholder, 1x front cover and 2x mounting feet or 2x mounting back.</p><p>Hardware required/assembly instructions:</p><ul><li>4x M3x4.6x4 Heat inserts to go into the holes (for the mounting parts) in the screenholder.</li><li>4x M3x8 SHCS to mount the screen to the screenholder.</li><li>4x M3x20 BHCS (or SHCS) + 4x M3 nuts to mount the front cover to the screenholder. You could also use 18mm screws if you're okay with it just biting into the plastic.</li><li>4x M3x10 SHCS (plus optional 4x M3 washers) to mount the chosen mounting parts to the screenholder.</li><li>4x M6x12 S/BHCS and 4x M6 3030 TNuts to mount the screen to the 3030 extrusion.</li><li>or 4 M3x12 Screws + 4x M3 2020 TNuts to mount to 2020.</li></ul><p>Prints are not too tricky and should be fairly obvious which way to print them.&nbsp;</p><p>Pics are from an earlier version so the back shot looks slightly different, but im sure you can figure it out :)</p>