BTT Adapter Plate for AIO Electronics Enclosure

thingiverse

Made this for my Ender 3 Pro external electronics case. I printed everything and then realized I hadn't left any access to the USB or SD ports. Other than this, I had to cut the sides of the enclosure in half. I used Prusaslicer to orient them so the back was touching the build plate and cut them at 115mm so I could print them on their side. The reason I cut them there was because it didn't interfere with any port holes and I could use the PSU to hold the bottom and the 120mm fan could hold the top. It worked really really well that way. The only other thing I'd change is widening the mounting points for the buck converters. I have the ones with a screen on them and screw terminals and they're currently only screwed in on one corner the rest just floating. This design took me all day to mash together, and that was with pre-existing designs to work with. BTT Case is from: https://www.thingiverse.com/thing:4558176 Ender 3 Pro External Enclosure from: https://www.thingiverse.com/thing:4405355