Brother P-Touch Wall/Cabinet Mount

prusaprinters

<p>I needed a holder for my <strong>Brother P-Touch H100</strong> to mount it to the wall or the side of a cabinet. As I didn't want to drill holes into the furniture I designed it with a hook that can be attached to the side of a cabinet - or as in my first case to the side ladder of a rack.</p><p>For a friend I also created a version to be screwed onto the wall in his workshop. For this you need three 3.5mm or 4mm countersunk screws.</p><p>For easy printing of the cabinet hooks I separated the holster from the hook, which is attached to the holster with with four little pins and can be fixed on the cabinet or rack simply with a piece of Scotch tape preventing it from falling off accidentally. (I didn't even glue the hook to the holster, but you might want to)</p><p>In case you need to design your own hook: I attached sketches of the hook base with the 6mm pins, which I drafted 1° (i.e. 1 degree conic). Or if you need some special hook, leave a comment and I might add another one for you.</p><p>No support is required for printing, Just print everything lying flat on its back.(just added the ..-flat versions for easier use of the model)</p><p>I printed them in PLA which worked perfectly fine (holders are in use for some months already)</p><p>This model is also available on Thingiverse: <a href="https://www.thingiverse.com/thing:5531384">https://www.thingiverse.com/thing:5531384</a></p><p>Update 2022-09-26: Added a simple wall mount with a single hole which can be used to hang P-Touch on an existing hook, screw or pegboard pin. The hole is triangle shaped to make sure it hangs vertical. Max diameter of the screw or pin: 10mm</p>