Brewzilla 3.1 screenmod

thingiverse

Little mod for the Brewzilla 3.1 to make it easier to read the display. You will need an 8 pole cable and some waterproof 8 pole connector. The rest can be glued and/or reused the stock parts.The cover and the gopromount should be printed in Petg or Abs, the coutnerpart of the gopromount that sits on the back of the display and the cable guide should be printed in TPU to prevent cracks and breaking.The backcover of the display is the stock one hidden inside the lower part of the brewzilla. I would suggest to print the cover in a 30degree angle with 3 walls and 15% infill with tree support, printed that way it should use less then 80g of filament----- V2The V1 is geat but the heat of the boiling pot was loosing up the double sided tape. Maybe it could be fixed with some silicon. I made a new version with a tripod stand for the screen an the ability to be fixed directly onto one of the handels getting rid of any heat issues. I would suggest to print everything in PETG or ABS