Bresser EXOS-2 NEMA17 Motor Holders

thingiverse

This is a remix of the EQ5 Goto NEMA17 motor brackets made by curly_cz. The originals were not compatible with Bresser EXOS-2 mount, due to small differences. Furthermore, they were not compatible with the bigger NEMA17 1.68A motors (8mm longer), and I prefer the GX12 connectors. I made some modifications in the 3D models, and others have to be made with a dremel. To recap... RA === EXOS2 - RA base.stl ----------------------------- Slightly reduced height (due to difference between EQ5 and EXOS2) EXOS2 - RA motor holder.stl --------------------------------------- Connector hole made on the rear side (since on the side there is no space if you use 1.68A motors) RA_belt_cover.stl ------------------------- Use original one. DEC === EXOS2 - DEC plate.stl ------------------------------- Slightly reduced height (due to difference between EQ5 and EXOS2); you may need to use one additional washer on the screw. dec_motor_holder_V2.stl ----------------------------------- Use original until I made some modifications; you will have to: - cut a part with dremel in order to get the motor axis enter the holder - sand the inner part because otherwise it will collide with the white DEC arrow of the mount If I have time to do the modification, I'll also add some space for better cabling (it is VERY snug) DEC_belt_cover.stl --------------------------- Use original one. DEC_brace.stl -------------------- Use original one.