Brake Cooling Scoop for BMW M2 - ver. 2

thingiverse

New upgraded version with increased airflow capacity. Now compatible with both 18" and 19" wheels, along with original compact brake calipers and enhanced brake kit (see note below). For 60mm hose (inner diameter) PRINTING: Can be printed without support structures. Print the scoop with its air intake opening facing downwards towards the printer's base plate. If the scoop doesn't fit, try placing it at a 45-degree angle diagonally over the printing plate. __Print one scoop as is for the left side and print a mirrored version for the right side.__ MOUNTING: Mount the scoop as far away from the car center as possible. The closer to the wheel, the more room it has to accommodate a turning wheel. Check out the pictures above! Note: For the larger calipers in the upgraded brake kit mainly found on M2 Competition, reverse the left and right scoops so the air hose tube is closer to the car, and mount the scoop as close to the car as possible instead of as close to the wheel as possible for the smaller original brake calipers.