Brainergy 4S 5200mAh LiPo holder light

thingiverse

Here are the modifications: The original creator of this customized thing can be found on Thingiverse, under item number 348618. To make this project, use the Customizer tool found at www.thingiverse.com/apps/customizer/run?thing_id=348618. To assemble and utilize these options: Set hard_case to 0. Change the thickness from the standard setting to 2. Specify battery_length as 139. Choose light on and hole on. Assign thick_edge the value of 0. Designate battery_height as 39. Define hole_distance as 55. Opt for no sunk_screws. Select wall_height at its lowest setting, 2. Turn cable_tie_hole and band_hole both to yes. The following measurements are required for production: hard_case is set to zero. The thickness has been adjusted to two units. The length of the battery should be set at one hundred thirty-nine. It should have a light on it. Three holes are to be made in it. This will create the appearance of an edge, however, due to this setting being 0; there won't actually be any edge to speak of. Its height should not exceed thirty-nine units. Each of the three holes needs to be set fifty-five apart from each other along its horizontal axis. These are designed with no sunk_screws in place for assembly or fastening purposes. Walls may not exceed two unit heights for proper operation or support capabilities required throughout. Both cable_tie_hole and band_hole are now at one which indicates that both should indeed have these elements included inside once complete!