Brain Teaser Puzzle Box - Designed for 3D Printers

prusaprinters

Brain Teaser Puzzle Box - Designed for 3D PrintersA confusing little box, that you can't open, but you can, but you can't open it, but you can open it.The inner box closes flush with the outer box making seem impossible to open without smashing it.It should be pretty obvious how to open it after you print it 😉. Please don't put anything inide it until you are sure you can open it.AboutThis is the classic bamboo puzzle box re-imagined for FDM printers. Features a no support, no brim design with tight tolerances that allow it slide open easily when solved.Printing Instructions 📦Layer Height: 0.2mm No supports!No brims!Darker filament is going to be better at hiding the gaps to make it a little tougher to solveI don't recommend resizing it. The tolerances were made for this size only. If you are interested in a larger size, reach out to me in the comments.Change Logv2: Increased size slightlySwitched from snaps to pressure tabsThis should help with issues where the inner box was getting stuck or became unable to openv1:If you are finding that the inner box is not able to slide all the way in, use one of the “Snaps” Outer Box models. This increases the tolerances for the locking mechanism. See below image for level of tolerances.Hello there! 👋I genuinely appreciate your support and interest in my 3D models. Liking my model and following my profile not only brightens my day but also helps me grow and create more of what you love in the world of 3D modeling. Thank you – your support means the world to me!Also check out my other regularly published models.YouTube: https://www.youtube.com/@spooldesignsInstagram: https://instagram.com/spooldesigns