bq Hephestos 2 Spool Holder

thingiverse

Hi! This is a spool holder designed specifically for the BQ Hephestos 2, but you can easily adapt it to fit other 3D printers. To create this spool holder, start by printing the 11 required *.obj files, excluding numbers 04 (printed twice) and 07 (printed six times if you want three spools). This particular part 07 is a BQ spool component. Next, gather the necessary materials: * Five aluminum tubes measuring 12x1 mm and one meter long * Five aluminum tubes measuring 8x1 mm and one meter long * Two aluminum tubes measuring 6x1 mm and one meter long * Forty bolts with M3 threads and a length of 10mm (refer to the images for clarification) * Sixteen bolts and nuts with M3 threads and a length of 16mm (again, refer to the pictures for guidance) * Twelve screws with M3 threads and a length of 12mm, used to secure the holder to a desk or board using part 01 * Two or four springs from a 1/10 scale model car (inspect the images for reference) To assemble this spool holder, you'll need a power drill equipped with a 2.5 mm borer bit to drill holes in the aluminum tubes and any surfaces required. The original *.blend file has been uploaded, allowing you to inspect the measurements for the aluminum tubes if needed. If you have any questions or concerns, please don't hesitate to reach out! Best regards, Jérémie Print Settings: * Printer: BQ Hephestos 2 * Resolution: 0.2 mm * Infill: 50% Design Notes: Designed using Blender v2.34