Box for KEDA 63-64 190KV with encoder
thingiverse
This is a mount for the KEDA Brushless Outrunner 63-64 190KV motor, specifically designed to hold an AMT102 encoder in place. The motor itself is controlled by an ODrive controller (https://odriverobotics.com). The mount consists of four equal side pieces, one front plate and one back plate, along with an encoder shaft. To see a visual representation of the mount, please visit: https://youtu.be/cJaDejEtz2E. This design is made to be easy to print (four copies of the mount6364.stl file are required). The front plate is flat, making it simple to design a replacement if needed. The motor being used is the KD 53-30 High Voltage Brushless Outrunner 190KV (https://hobbyking.com/en_us/kd-53-30-high-voltage-brushless-outrunner-190kv.html?___store=en_us). The encoder used in this setup is the CUI AMT102, sourced from https://odriverobotics.com. The following hardware was utilized: * 8x M3 screws, 12mm long, countersunk head * 12x M3 screws, 8mm long, countersunk head * 20x M3 nuts * 4x M4 screws, 10mm long, countersunk head (for the motor) * 2x M2.5 screws, 12mm long, button head (for the encoder) * 2x M2.5 nuts * 1x 608 bearing, size 8x22x7mm
With this file you will be able to print Box for KEDA 63-64 190KV with encoder with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Box for KEDA 63-64 190KV with encoder.