Box for eachine Lizard 95 (Version 2 with RunCam MicroSwift)

thingiverse

This is my enhanced version of the Box for Lizard 95 (previous model can be found at https://www.thingiverse.com/thing:2472510).\r\nThe majority of changes were made to accommodate my customized Lizard 95 with a RunCam Micro Swift and an ATX03 transmitter.\r\nHowever, it still fits the original model, and I have added some features for that purpose.\r\nThe empty space around the Skid is now utilized as an additional spare parts box.\r\nThe closing "Bottom_Case_Closing.stl" has been revised with the part "Snap.stl," which must be attached to the bottom part "Case_bottom_Skid.stl" using an M3 screw.\r\n\r\nFor those who do not use my Landing Skid (https://www.thingiverse.com/thing:2472520), I have provided a smaller bottom case with some fixtures (Case_bottom_woSkid.stl).\r\n\r\nIf you want to create other parts surrounding the Lizard, I have supplied my simplified Lizard model as .stl and .obj.\r\n\r\nConverting the stock camera to a RunCam Micro Swift is quite straightforward:\r\n1. Remove the cfk camera holder and reinstall it with a 180° rotation (so that the original camera faces backwards).\r\n2. Remove the stock camera.\r\n3. Mount the printed part "ATX03_Antenna_holder" in the upper holes where the stock camera was secured.\r\n4. Attach the TX03 transmitter with some protective foam and a cable tie. The antenna position can be adjusted up or down as desired.\r\n5. Drill a 2mm hole in the center of a spare bolt and attach the Micro Cam with its frame here using an M2 screw, then secure it to the cfk parts as shown in the pictures.