Bow Sander (Sanding Bow) with f3d file

prusaprinters

I have a lot of 1" thick sandpaper strips for the Rockler Bow Sander. The problem is that the tension adjustment is not well thought out - it's very difficult to get good tension. I've fixed that with this design. I've attached the Fusion file. <h3>Print instructions</h3>I printed with 11 perimeters and 30% gyroid infill. I wanted the pieces to be strong! I did print the bow separately from the pieces. And my settings were slightly different from the attached 3mf, because I have a MMU2S, and it has lower PETG printing temps. I put some superglue into the holes of the tension pieces and clamped them in the open position around the bow until it the glue dried. The pegs are deliberately tight. You may need to push them from the one side and use pliers to pull them out.

Download Model from prusaprinters

With this file you will be able to print Bow Sander (Sanding Bow) with f3d file with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Bow Sander (Sanding Bow) with f3d file.