Bow Quiver - 4 Arrow

thingiverse

The large bow quiver is specifically designed with a Bullhead turkey hunting broad-head in mind, which appears to be too big for standard quiver sheaths. It's engineered to hold 1 bullhead and 3 other 1.25 inch broad-heads, or 4 regular broad-heads. The small bow quiver can accommodate 3 X 1.25 inch regular broadheads (2 or 3 blade). Both designs are meant to be interchangeable and customizable. Simply unscrew the #8 bolts from the old reused arrows, slide on the desired parts, and re-secure with new fasteners. To complete this project, you'll need: Epoxy (or other strong adhesive) 2X #8-32 0.75 inch screws (to match your arrow inserts) 2X 8 mm arrow shafts (with intact inserts, trimmed if desired; I used old bent aluminum arrows) Thick Foam Pad (I used a gardening kneeling pad, 1 inch thick; for arrow sheath material) ~1/16 inch rubber or foam rubber sheet (for tightening dock tolerances) 2X #10-24 round cap screws (for attaching the clip to your bow) *2X 1/4-20 bolts (as end-caps if you choose to trim railed arrow shafts) *4X ~8 mm ID o-rings (for keeping railed items in place)