Bow Kick Stand

cults3d

Simple kick stand for a compound bow with skinny limbs, 40mm wide 8.5 thick, tighter fit than commercial stands. Requires 2x 3mm bolts 35mm long minimum. 1x 4mm nut and bolt 25mm long 2x 4mm washers Elastic bands or springs. Construction is pretty simple, just like any other bow stand, except an old 7.6mm arrow shaft is used as the legs and needs to be glued in place. The parts Knob nut/bolt side are for elastic bands to help retain them better. Position the flat side towards the cut out for the bow limbs otherwise it will bind on the bow when closing. Edit.: *Added components for wider bow limbs, 60mm wide 7mm thick or less will fit in the 60mm wide parts. *Add components for limbs 55mm wide 10mm thick or less