Boundary wire groove tool mower robot - Kerb-Werkzeug für Begrenzungsdraht Mähroboter

prusaprinters

<p>Boundary wire groove tool mower robot - &nbsp;Kerb-Werkzeug für Begrenzungsdraht Mähroboter<br>If you like it --&gt; press like it :-)</p><p>Tool to make the groove for the boundary wire of your lawnmower. It worked at my lawn at wet condition, one day after some rain. If it will worl depends on your ground quality, so if you have in 30 to 40mm depth a lot of stones, you will not have fun. I had to remove only a few stones with a screwdriver.<br>Tool to install the wire can be found in my other models.<br>Should be printed stable, PETG is recommended. I´ve printed with 8 walls, 20% infill and 3 infill lines.<br>I´ve used a round wood stick with 30mm diameter and length of 500mm. You can fix the groove wheel (with “Halter” on both sides and some screws ) in the distance you need, with my worx mower i had a distance of 230mm from right, that it is optimized for edge cutting. If the mower can drive over some stones at the edge, i will drive with the right wheel 40mm on the stones. The wheels should still rotate after mounting the screws, i assembled them that they are totally fixed and removed the screws some degrees.</p><p>Would be happy to see your makes!</p>