Bottle rinser spare part "double blast" fermtech

thingiverse

This is a spare part for a cheap bottle rinser that Amazon sells at a great price.\r\n\r\nImportant Note: \r\n- You must print this item upside down because of the one-way valve.\r\n- The molds used for the left and right parts are different, so you can see them labeled as 1 and 2 under the original part. This means you'll need to adjust the weight accordingly, depending on which piece you need (piece N°1 requires 100% - piece N°2 requires 105%).\r\n- I strongly recommend using a 1mm drill for the small hole at the top by hand only.\r\n\r\nI've created seven different versions of the one-way valve, each with its own unique design compared to the original. This is because the original design wasn't very printable friendly and needed more resistance. (You can see these designs in the pictures.)\r\n\r\nSuggested Printing Settings: \r\n- Support: at least 25%\r\n- Fan Speed: at least 80% minimum\r\n- Printed with a 0.4 mm nozzle\r\n\r\nBrewers and beer enthusiasts, I hope you'll love this design !