Bottle Opener - 5p coin - With/Without Screw

prusaprinters

<p>I was looking around for a bottle opener to make, the one I had made before was bulky. I liked the fact that it had a coin though. Looking around, there seemed to be hard to find a smaller one, with a coin that i liked the look of, so made my own.&nbsp;</p><p>It uses a British 5p and a 2.5mm by 10mm screw.</p><p>The coin I added by setting the print to pause (and do the M600 colour change G code in Prusaslicer) just before the coin hole is covered up. &nbsp;<br>The screw was used just to increase strength and rigidity in the top part of the opener. This was screwed in later.&nbsp;</p><p>Print with flat side at the bottle, like in photos. You will need support for the overhang. Id suggest using paint on support so the support doesn't get in the way of the coin.&nbsp;</p><p>Originally I tried to print this in PLA. Unfortunalty, to keep the model small, the walls on the side of the coin are fairly thin (Only 1.25mm wide). This meant in testing, it was a point of failier. Therefor I recomend to print in PETG instead.&nbsp;</p><p>&nbsp;</p><p>I'd suggest printing at 100%. But who am I to tell you what to do ;)</p><p>Enjoy the model and remix all you want :).&nbsp;</p><p>&nbsp;</p><p>&nbsp;</p><p>Edit: Added a model without screw</p>