Bottle cage for camper

thingiverse

## Bottle cage for camper ### Introduction Simple, flexible but very stable holder for large 1.5 l bottles and Nalgene wide mouth bottles. The holder is deliberately designed in two parts to be able to freely choose the height so that top-heavy bottles do not fall out. The upper part of the holder is built particularly stable to prevent even on very bumpy gravel roads a slip out of the bottle or a breakage of the holder. ### Printing I recommend more heat resistant filament such as PETG, ASA or ABS as PLA will not hold its shape during the summer months in the car. A layer height of 0.2 mm with a filling of 20% show good and stable results. Both parts can be printed without support. ### Assembly The lower part can be screwed directly into the base plate via four 3 mm screws and the upper part with two 5 or 6 mm screws. ### Updates 2021-04-10 I modified the lower part so that it can now be attached to the wall. <b>Check out my other designs for [expedition vehicles and camper vans](https://www.thingiverse.com/zefram_cochrane/collections/cochranes-expedition-vehicle "expedition vehicles and camper vans"). <b>Visit my website for more information: [www.science-feles.de](https://science-feles.de/designs/ "www.science-feles.de"). <b>I would be very happy about a [Tip](https://www.paypal.com/donate?hosted_button_id=33A3BXW43NW42 "Tip"). > --------------------------------------------------------- > Ceterum censeo martem esse abeundum. > ---------------------------------------------------------