Boostinjdm Jumper T-Lite Gimbal Guards

thingiverse

I tried a few gimbal protectors others had designed and just wasn't happy with any of them. So here is my take on it. 5/16/21 Just added a profile of the T-lite in fusion I have been working on. I have not test fit a physical copy yet. So I'd suggest printing it on poster board, cutting out, and test fitting before committing to a 3d printed model. 5/18/21 I replaced the first Tlite fusion file with the Cookie Cutter file. It is a better fit. The interior construction line is the body of the Tlite. 11/7/21 Added ELRS to my Tlite and decided to do some other TPU mods. Here are the files and a few tips. "TLite HM ELRS T Ant Mount" and "Plug" go together. I used the 90mm HappyModel ELRS T antenna and external module. Base of antenna mount snaps into the module. Top of T mount is held to the Tlite with VHB. It's a tough print. Trick to inserting the antenna into the TPU is to fold the TPU into a U shape. Put the antenna tips in and carefully feed in the rest. Printed at .1mm layer height and supports touching build plate. "TLite Int Mod T Ant Mount" used the HappyModel ELRS T antenna to replace the threaded base and make things more compact. You will lose a little range, but it's not too significant. Folding the TPU into a U shape and inserting the antenna works best. You will need to cut off the ufl and solder the antenna to the internal module. Printed at .1mm layer height and supports touching build plate. "TLite Stick Guard 8mm V2" A little better fitting and nicer to use than the first version. This fits the factory stick ends from their shortest to maybe +5mm. Also has a button cover added. I printed mine with supports under the center bridge and the flare of the finger holds. Set overhang support angle to 42 degrees and printed it solid with 3 walls and .1mm layer height.