Boosted Board Remote Wall Mount

prusaprinters

<p>I basically wanted a wall mount for my Boosted Board remote where the charging cable would automatically slide into the remote. Additionally the leash just slides through a channel to the bottom. The charging cable can be zip tied to the bottom part of the mount.</p> <p><strong>Update:</strong></p> <p>I was not really happy with the original design of the charging cable mount. Therefore I slightly redesigned the zip tie attachment to a single plane to the back of the cable. With two zip ties tensioned really tough with two tongs, the cable sits in place pretty well now. Also I adjusted the model so that I could print it without any support and made it a bit stiffer overall.</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Monoprice</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Select Mini</p></div> <p><strong>Rafts:</strong></p> <p>Yes</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div> <p><strong>Notes:</strong></p> <p>~~I printed the mount with the charging port at the bottom. By doing this I avoid having support material inside of the model which would probably be pretty complicated to be removed later on.~~</p> <p>I printed the mount with the opening for the remote towards the build plate. The model should be rotated correctly already. The model came out great without any supports but I used a raft because my white filament does not stick really well to my glass bed.</p> </p></p> Category: Organization